Main Bearing cap bolts........90 - 104 Nm........66 - 77Lb ft
Big End Cap Nuts...............26 - 33 Nm........19 -24Lb ft
Crank Pulley....................115 -130 Nm........85 -96Lb ft
Oil Pump to block..............14 - 17 Nm........10 -13lb ft
Flywheel Bolts..................64 - 70 Nm........47 - 52Lb ft
Sump Bolts (Stage 1)..........4 - 7 Nm........3 -5 lb ft...(Stage 2) 7 - 10 Nm...5 -7 Lb ft

Cylinder Head (Hex Bolts)...40 - 45 Nm........30 - 33 Lb ft (Stage 2) 55 - 70 Nm..41 - 52 Lb ft..(Stage3) 95 115Nm....70-85Lb ft (after 20mins).
Cylinder Head (Hex Bolts)...Stage 4 after warm up, 95 - 115Nm.......70 -85Lb ft.

Cylinder Head (Torx Bolts)...35 - 40 Nm.........26 -30 Lb ft (Stage 2) 70 -75 Nm......52 - 55Lb ft (Stage 3 after 5 mins) Tighten 90 degrees further.